Ranger Rover MPS6 Gearbox Clone by Yanhua Mini ACDP with Module 14

It has been confirmed that Mini ACDP with Yanhua ACDP module 14 successfully clone MPS6 gearbox for Ranger Rover without soldering.

Device connection:

1.Connect the MPS6 Gearbox Clone interface board correctly to the gearbox interface

2.Short the CAN resistor on the OBP+ICP adapter to the “CAN-R Join”

3.Connect ACDP, OBP+ICP adapter, interface board and gearbox.

Main steps:

Run Mini ACDP APP

Go to Jaguar/LandRover-> Gearbox Clone-> Ranger Rover-> MPS6

Step 1: Identify gearbox

Select “Identify”

Confirm the connection between ACDP and the gearbox 1 is normal

Detect out the system info (module type & SN) successfully

Identify chip info finished and backup file

Step 2: Full backup data of gearbox 1

Select “Full Backup Data”

Detect the system info and then save the chip data file read out

Step 3: Write data into Gearbox 2

Connect MPS6 module to Gearbox 2 and Yanhua ACDP using the same steps

Select “Full Write Data”

Detect the system info and select the chip data file has been saved in step 2 to write

Write chip data successfully!

Result: Mini ACDP with module 14 perfectly clone Ranger Rover MPS6 gearbox.

Devices used:

Yanhua Mini ACDP Programming Master Basic Module with License A801:

Yanhua ACDP Module 14 MPS6 Gearbox Clone for Land Rover Ford Chrysler Dodge with License A301:

Recent Posts