If you connect Yanhua Mini ACDP2 to the PC via the USB cable, but the ACDP-II software appears “No Device found”, go to “Settings” and “PC Bound to ACDP-II device”, there is no device info in the device list, it also shows “Unbound”. This situation can be achieved by modifying the device IP and connecting to the device.
The solution:
Move the mouse to the network icon in the lower right corner of the computer
Right click and select “Open Network & Internet settings”
Click “Change adapter options”
If you don’t know which network is ACDP, try to unplug the USB interface of the device, then plug again, then you see the network supported.
Right click the network and select “Properties”
Click “Internet TCP/IPv4”
Click “Use the following IP address”
Enter the IP address and DNS server address below:
IP address:
- IP address: 192.168.88.88
- Subnet mask: 255.255.255.0
- Default gateway: 192.168.88.1
DNS server address:
- Preferred DNS server: 192.168.88.1
Click “OK”
Wait for a few seconds before the Yanhua ACDP2 automatically connects
