What’s the BMW F/G chassis odometer wiring harness?
Use BMW F/G chassis odometer wiring harness connects the odometer and power the wiring harness. Press the wake-up button which is located in the lower left corner of the odometer to light up the instrument and check the mileage.
BMW F/G chassis odometer wiring harness using tips:
If resetting odometer needs to replace simulate chips and install filter,
Step 1: reset the simulate chips first
Step 2: Use BMW F/G chassis odometer wiring harness light up the odometer
Step 3: Make sure odometer resetting is successful, and then install filter.
Step 4: Use BMW F/G chassis odometer wiring harness light up odometer after the filter is installed, and then install odometer back to the car after confirm it shows normal.
Please kindly notice:
After the odometer which needs to replaced simulator chip or installed filter been reset and installed back to the car.
This operation method can avoid problems such as odometer screen go blank or could not light up or shows red dot.